TENS
:
Durable, ergonomic, as always, a potent defense against pain, the Ultima 3 is a great defense against pain. Just remove the
sleek black unit from its professional case, insert the battery, apply the
electrodes, and plug in the lead wires. Turn on the unit to adjust the pulse
width (how strong the current is) and the frequency (how many times the current
is delivered over time) and you can enjoy a pain free day while you take it
anywhere you go! TENS stimulates sensory nerves to block pain signals, stimulate
endorphin production to help normalize sympathetic function and has a biphasic,
low volt current.
Technical
Specifications
Output: Two independent output terminal.
Wave Form:
bi-phasic square waves with
zero net direct current (DC) component.
Amplitude: 0-80mA each
channel, adjustable (500 ohm load)
Pulse
Width: 50 to 260 microseconds,
adjustable.
Frequency: 2 to 150 Hz,
adjustable.
Charge per Pulse: 80mA x
250 microseconds (500 ohm test load)
Maximum Voltage: 0 to 80
volts.
Maximum Charge: 20 microcoulombs per pulse maximum, positive pulse and negative
pulse seperate.
Function:
(1)Burst: 7 pulses per burst, 2
bursts per second, 100Hz fixed frequency.
(2)MRW:
Pulse rate and pulse width show alternating periodic change, For example, if
pulse rate and pulse width are set to maximum respectively, when the pulse
amplitude is changed from 150-75Hz decreasing, pulse width would be changed from
130-260 us increasing, at period 1 second.
(3)SD:
Pulse rate and pulse width show alternating periodic change, For example, if
pulse rate and pulse width are set to maximum respectively, when the pulse
amplitude is changed from 40-30 volts decreasing, pulse width would be changed
from 175-260 us increasing, at period 6 seconds.
(4)Bi-Pulse:
Channel 1 fixed output pulse rate at 100Hz, Channel 2 fixed output pulse rate at
4Hz. Continuously output for 1 second and then stop output for 1 second,
complete cycle at period 2 sec.
(5)Normal:
Continuous output with adjustable amplitude, pulse rate, pulse
width.
Low battery:
Indicator illuminate when the power supply voltage
falls below 6.5 volts
Timer:
5~90 Minutes
Power
Source: 9 volt alkaline or rechargeable
battery.
Size:
23.7 x 59 x 101mm
Accesory:
plastic belt clip
Weight:
150 grams (including battery)
Package:
(1) Controller unit (2) 9v battery (3)
instructional manual (4) Lead wires (5) self-adhesive electrodes (6) carrying
case
Weight:
140 grams (including battery)