|
It has an indicator
for sound and luminescent state, a timing switch, a power voltmeter and an
operating output protection.
Features:
· The output
pulse waves of the machine are in low voltage and low frequency. There are five
types of pulse waves to be selected. Continuous wave, dense-disperse wave,
intermittent wave, ripple wave and respiration wave.
· Four kinds
of wave combinations can be used at the same time, separately and get the two
output or more crossed to use.
Technical
data:
· Continuous wave: pulse duration =
0.5ms; repeated pulse frequency: f1=1Hz – 100Hz.
· Dense-disperse wave: Dense-disperse
wave displays alternatively, disperse frequency is f1
same as base wave; dense frequency is about 100Hz; pulse duration is 0.5ms;
FREQ2 regulates the frequency f2 of 10-40 cycles per minute.
· Intermittent wave: Pulse shows at regular interval at a
frequency of 10-40 cycles per minute.
· Ripple wave: Its amplitude
increases to maximum and drops suddenly, and repeats the process.
· Respiration wave: Its amplitude
increases first, then drops quickly to zero, and repeats this
process.
KWD 808-I comes with
6 outputs, 8 wires with alligator clips that can be used on 8 acupints individually or all together at the same time to
apply acupuncture needle treatment; and it is also equipped with 4 self-adhesive
electrodes that can be used to apply electrical stimulation without using
acupuncture needles.
Size: 8.5”L x 6.5”W x
3.0”H
Weight: 3.3
lbs
Accessories: * 1 - Acupoints Detecting
Probe
8
- wires with 8 alligator clips
4 -
self-adhesive
patches
1 -
User’s
Manual
1 - acupuncture meridians and
acupoints chart
1 - A/C adaptor for both 110V
& 220V worldwide use
Note:
D/C (9 V) is accessible with 6 x “C” CR14 UM2 Batteries (not
included). The
“C” batteries can be purchased from any local
stores. | 
Acupuncture Machines
