It has an indicator for sound and luminescent state, a timing switch, a power voltmeter, a music device playing when the treatment is over or before it starts and an operating output protection.

     Features:

·       The output pulse waves of the machine are in low voltage, low frequency.

·       There are five types of pulse waves to be selected.

Continuous wave, dense-disperse wave, intermittent wave, ripple wave and respiration wave

·       Four kinds of wave combinations can be used at the same time, separately, or get the two output or more crossed to use.

     Technical data:

·       Continuous wave: pulse duration = 0.5ms; repeated pulse frequency: f1=1Hz – 100Hz.

·       Dense-disperse wave: Dense-disperse wave displays alternatively, disperse frequency is f1 same as base wave; dense frequency is about 100Hz; pulse duration is 0.5ms; FREQ2 regulates the frequency f2 of 10-40 cycles per minute.

·       Intermittent wave: Pulse shows at regular interval at a frequency of 10-40 cycles per minute.

·       Ripple wave: Its amplitude increases to maximum and drops suddenly, and repeats the process.

·       Respiration wave: Its amplitude increases first, then drops quickly to zero, and repeats this process.

           808-II comes with 4 outputs, 8 wire clips which can be used on 8 acupints at the same time

    Size: 8.5”L x 6.5”W x 3.0”H

    Weight: 3.3 lbs

    Accessories:  * an acupoint detector

                             4 wires with 8 alligator clips

                             8 electrodes

                             8 magnets

                             an adaptor